How to maintain and clean the crane

After using the crane, it is necessary for everyone to maintain and clean it. How to maintain and clean the crane specifically? Let us introduce Shandong single beam crane manufacturer to you.

1. Brake: The spring is intact without any fracture or damage; The back cap is securely fastened without any looseness; The locking magnet crossbar pin should be free of deformation and breakage; The frame axis pin and foot screws are intact without any looseness or change; The coupling screws of the brake wheel's backrest are securely fastened without any looseness.

2. Transmission: The combination and foundation screws are tightened without looseness; The combination surface has no oil leakage and the oil level and quality are normal; Good lubrication; External cleaning; Listen carefully for any abnormal sounds.

3. Coupling: The coupling screws are tightened without looseness; The coupling has no oil leakage; Regularly refuel; External cleaning.

4. Gear drum: teeth mesh without misalignment; The large and small gears are undamaged, well lubricated, and the protective cover is intact and firm; The screws connecting the large gear and the drum shaft are securely fastened.

5. Bearing seat: The combination and foundation screws are tightened without looseness; The oil cup is intact, the oil level is sufficient, and there is no deterioration; During inspection, tighten and add oil appropriately; External cleaning.