Three misconceptions that electric double beam crane manufacturers need to pay attention to in crane maintenance and upkeep

The maintenance and upkeep of cranes is very important, but some users often make operational mistakes during maintenance and upkeep, resulting in improper handling of maintenance and upkeep work, causing serious economic losses to us. Below, the manufacturer of electric double beam cranes will analyze three specific misconceptions in the maintenance of cranes:

Misconception 1

Many crane owners feel that the speed of the crane is slowing down, so they rush to the store to replace the three filters. Due to different replacement requirements for the three filters, the crane three filters do not need to be replaced together. Generally speaking, due to different replacement requirements for the three filters, the crane three filters do not need to be replaced together. From a professional perspective, the air filter is usually replaced at 30000 kilometers, the machine filter at 5000 kilometers, and the air filter can be replaced at 10000 kilometers. If they are replaced together, it will be a waste. If it is a car that cannot be driven for a long time, there is no need to replace all three filters, just replace the oil and filter.

Misconception 2

Adding oil too slowly, most car owners are unaware that too much or too little oil can affect the quality of the car. Many car owners know that poor engine oil can damage the crane, but they did not expect that excessive engine oil can also damage the car. If the engine oil increases too much, it will cause severe agitation of the crankshaft handle and connecting rod big end during operation, which will only increase the loss of internal power of the engine. There is also a possibility of burning out the engine oil due to excessive oil splashing on the cylinder wall.

Misconception 3

Waxing too frequently, often waxing the crane, although it will make the car paint more shiny, it will cause damage to the car. Because car wax contains alkaline substances, long-term use can make the car body turn black.

When maintaining a crane, we must avoid the three misconceptions mentioned above in order to ensure that the maintenance and upkeep work can be carried out correctly and smoothly

。